TOUGH2 throws exception for input

[softwareengineerprogrammer]

Per user

*** Subsurface technical parameters ***
****************************************
Reservoir Model,6,			--- Use TOUGH2 simulator
TOUGH2 Model/File Name,Doublet,	        --- Use built-in Doublet TOUGH2 model
Reservoir Depth,5.5, 			--- [km]
Number of Segments,1,			--- [-]
Gradient 1,60, 			--- [deg.C/km]
Maximum Temperature,400,		--- [deg.C]
Number of Production Wells,1,		--- [-]
Number of Injection Wells,1,		--- [-]
Production Well Diameter,7,		--- [inch]
Injection Well Diameter,7,		--- [inch]
Ramey Production Wellbore Model,1,	--- Should be 0 (disable) or 1 (enable)
Injection Wellbore Temperature Gain,0,	--- [deg.C]
Production Flow Rate per Well,25, 	--- [kg/s]
Production Wellbore Temperature Drop,.5,			---[deg.C]
Injection Wellbore Temperature Gain,0,   			---[deg.C]

--- Fracture geometry below required for reservoir models 1 and 2
Reservoir Volume Option,4,		--- Should be 1, 2, 3, or 4. See manual for details.
Reservoir Volume,1E9,			--- [m3] (required for reservoir volume option 3 and 4
Water Loss Fraction,0.0,		--- [-] (total geofluid lost)/(total geofluid produced)
Reservoir Impedance, 0.05,		--- [GPa*s/m3]
Injectivity Index,5,			--- [kg/s/bar]
Productivity Index,5,			--- [kg/s/bar]
Injection Temperature,20,		--- [deg.C]
Maximum Drawdown,1,			--- [-] Maximum allowable drawdown before redrilling (a value of 0.1 means redrilling of 10% drawdown)
Reservoir Heat Capacity,1185,		--- [J/kg/K]
Reservoir Density,2700,			--- [kg/m3]
Reservoir Thermal Conductivity,3.8,	--- [W/m/K]
Reservoir Porosity,0.12,		--- [-]
Reservoir Permeability,5E-14,		--- [m2]
Reservoir Thickness,800,		--- [m]
Reservoir Width,1000,			--- [m]
Well Separation,1000,			--- [m]

*** Surface technical parameters ***
************************************
End-Use Option,1,			  			---[-] Electricity
Power Plant Type,1,			  			---[-] Supercritical ORC
Circulation Pump Efficiency,.8,	  				---[-] between .1 and 1
Utilization Factor,.9,			  			---[-] between .1 and 1
Surface Temperature,20,		  				---[deg.C]
Ambient Temperature,15,		 				---[deg.C]


*** Economic/Financial Parameters ***
*************************************
Plant Lifetime,30,						--- [years]
Economic Model,2,						--- Should be 1 (FCR model), 2 (Standard LCOE/LCOH model), or 3 (Bicycle model).
Discount Rate,0.05,
Inflation Rate During Construction,0,				--- [-]
Well Drilling and Completion Capital Cost Adjustment Factor,0,	--- [-] Use built-in well cost correlation as is
Well Drilling Cost Correlation,1,				--- [-] Use built-in well drilling cost correlation #1
Reservoir Stimulation Capital Cost,0,				--- [M$/injection well] Reservoir stimulation capital cost per injection well
Surface Plant Capital Cost Adjustment Factor,1,			--- [-] Use built-in surface plant cost correlation as is
Field Gathering System Capital Cost Adjustment Factor,1,	--- [-] Use built-in pipeline distribution cost correlation as is
Exploration Capital Cost Adjustment Factor,0,			--- [-] Use built-in exploration cost correlation as is
Wellfield O&M Cost Adjustment Factor,1,				--- [-] Use built-in wellfield O&M cost correlation as is
Water Cost Adjustment Factor,1,					--- [-] Use built-in water cost correlation as is
Surface Plant O&M Cost Adjustment Factor,1,			--- [-] Use built-in surface plant O&M cost correlation as is
Electricity Rate,0.1278,					--- [$/kWh] Required to calculate pumping cost in direct-use or additional revenue stream in cogen option.


*** Simulation Parameters ***
Print Output to Console,1,		--- [-] Should be 0 (don't print results to console) or 1 (print results to console)
Time steps per year,4,			--- [1/year]