diff --git a/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.all b/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.all index 534cb7f18..4496a058f 100644 --- a/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.all +++ b/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.all @@ -892,6 +892,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.003 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/coupled_AM2_LM3_SIS2/Concurrent_ice_1deg/MOM_parameter_doc.all b/coupled_AM2_LM3_SIS2/Concurrent_ice_1deg/MOM_parameter_doc.all index ffbe138f3..e7cdd2389 100644 --- a/coupled_AM2_LM3_SIS2/Concurrent_ice_1deg/MOM_parameter_doc.all +++ b/coupled_AM2_LM3_SIS2/Concurrent_ice_1deg/MOM_parameter_doc.all @@ -892,6 +892,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.003 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/coupled_AM2_LM3_SIS2/Intersperse_ice_1deg/MOM_parameter_doc.all b/coupled_AM2_LM3_SIS2/Intersperse_ice_1deg/MOM_parameter_doc.all index 631fcd831..e0e83bc43 100644 --- a/coupled_AM2_LM3_SIS2/Intersperse_ice_1deg/MOM_parameter_doc.all +++ b/coupled_AM2_LM3_SIS2/Intersperse_ice_1deg/MOM_parameter_doc.all @@ -892,6 +892,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.003 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ice_ocean_SIS2/Baltic/MOM_parameter_doc.all b/ice_ocean_SIS2/Baltic/MOM_parameter_doc.all index 5dc0003eb..62a56fcbf 100644 --- a/ice_ocean_SIS2/Baltic/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/Baltic/MOM_parameter_doc.all @@ -892,6 +892,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.003 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ice_ocean_SIS2/Baltic_ALE_z_offline_tracers/MOM_parameter_doc.all b/ice_ocean_SIS2/Baltic_ALE_z_offline_tracers/MOM_parameter_doc.all index 4f83e7ece..8d8e5716c 100644 --- a/ice_ocean_SIS2/Baltic_ALE_z_offline_tracers/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/Baltic_ALE_z_offline_tracers/MOM_parameter_doc.all @@ -1078,6 +1078,9 @@ HBBL = 10.0 ! [m] ! KV_EXTRA_BBL if BOTTOMDRAGLAW is not defined, or the thickness over which ! near-bottom velocities are averaged for the drag law if BOTTOMDRAGLAW is ! defined but LINEAR_DRAG is not. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.all b/ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.all index 53023b16b..082c49204 100644 --- a/ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.all @@ -1196,6 +1196,9 @@ HBBL = 10.0 ! [m] ! KV_EXTRA_BBL if BOTTOMDRAGLAW is not defined, or the thickness over which ! near-bottom velocities are averaged for the drag law if BOTTOMDRAGLAW is ! defined but LINEAR_DRAG is not. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.all b/ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.all index b12d9e939..26f235738 100644 --- a/ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.all @@ -1200,6 +1200,9 @@ HBBL = 10.0 ! [m] ! KV_EXTRA_BBL if BOTTOMDRAGLAW is not defined, or the thickness over which ! near-bottom velocities are averaged for the drag law if BOTTOMDRAGLAW is ! defined but LINEAR_DRAG is not. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ice_ocean_SIS2/Baltic_OM5_025/MOM_parameter_doc.all b/ice_ocean_SIS2/Baltic_OM5_025/MOM_parameter_doc.all index 4ba8e37d5..c21abbac6 100644 --- a/ice_ocean_SIS2/Baltic_OM5_025/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/Baltic_OM5_025/MOM_parameter_doc.all @@ -1183,6 +1183,9 @@ HBBL = 10.0 ! [m] ! KV_EXTRA_BBL if BOTTOMDRAGLAW is not defined, or the thickness over which ! near-bottom velocities are averaged for the drag law if BOTTOMDRAGLAW is ! defined but LINEAR_DRAG is not. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ice_ocean_SIS2/Baltic_OM5nb_025/MOM_parameter_doc.all b/ice_ocean_SIS2/Baltic_OM5nb_025/MOM_parameter_doc.all index 64a69b24c..74eadccb4 100644 --- a/ice_ocean_SIS2/Baltic_OM5nb_025/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/Baltic_OM5nb_025/MOM_parameter_doc.all @@ -1175,6 +1175,9 @@ HBBL = 10.0 ! [m] ! KV_EXTRA_BBL if BOTTOMDRAGLAW is not defined, or the thickness over which ! near-bottom velocities are averaged for the drag law if BOTTOMDRAGLAW is ! defined but LINEAR_DRAG is not. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ice_ocean_SIS2/OM4_025/MOM_parameter_doc.all b/ice_ocean_SIS2/OM4_025/MOM_parameter_doc.all index 3e8f914e8..5e9274fe1 100644 --- a/ice_ocean_SIS2/OM4_025/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/OM4_025/MOM_parameter_doc.all @@ -1196,6 +1196,9 @@ HBBL = 10.0 ! [m] ! KV_EXTRA_BBL if BOTTOMDRAGLAW is not defined, or the thickness over which ! near-bottom velocities are averaged for the drag law if BOTTOMDRAGLAW is ! defined but LINEAR_DRAG is not. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ice_ocean_SIS2/OM4_05/MOM_parameter_doc.all b/ice_ocean_SIS2/OM4_05/MOM_parameter_doc.all index 5dbe5570f..8f497b899 100644 --- a/ice_ocean_SIS2/OM4_05/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/OM4_05/MOM_parameter_doc.all @@ -1200,6 +1200,9 @@ HBBL = 10.0 ! [m] ! KV_EXTRA_BBL if BOTTOMDRAGLAW is not defined, or the thickness over which ! near-bottom velocities are averaged for the drag law if BOTTOMDRAGLAW is ! defined but LINEAR_DRAG is not. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.all b/ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.all index da0737ad2..a97137c15 100644 --- a/ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.all @@ -1187,6 +1187,9 @@ HBBL = 10.0 ! [m] ! KV_EXTRA_BBL if BOTTOMDRAGLAW is not defined, or the thickness over which ! near-bottom velocities are averaged for the drag law if BOTTOMDRAGLAW is ! defined but LINEAR_DRAG is not. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ice_ocean_SIS2/SIS2/MOM_parameter_doc.all b/ice_ocean_SIS2/SIS2/MOM_parameter_doc.all index ebd01d983..e4e600ae4 100644 --- a/ice_ocean_SIS2/SIS2/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/SIS2/MOM_parameter_doc.all @@ -863,6 +863,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.003 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ice_ocean_SIS2/SIS2_bergs_cgrid/MOM_parameter_doc.all b/ice_ocean_SIS2/SIS2_bergs_cgrid/MOM_parameter_doc.all index f4a498cd8..3b86b7396 100644 --- a/ice_ocean_SIS2/SIS2_bergs_cgrid/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/SIS2_bergs_cgrid/MOM_parameter_doc.all @@ -863,6 +863,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.003 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ice_ocean_SIS2/SIS2_cgrid/MOM_parameter_doc.all b/ice_ocean_SIS2/SIS2_cgrid/MOM_parameter_doc.all index f8ff12cbe..289d4f046 100644 --- a/ice_ocean_SIS2/SIS2_cgrid/MOM_parameter_doc.all +++ b/ice_ocean_SIS2/SIS2_cgrid/MOM_parameter_doc.all @@ -863,6 +863,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.003 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/CVmix_SCM_tests/cooling_only/BML/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/cooling_only/BML/MOM_parameter_doc.all index df4c4bb7a..775899565 100644 --- a/ocean_only/CVmix_SCM_tests/cooling_only/BML/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/cooling_only/BML/MOM_parameter_doc.all @@ -722,6 +722,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/CVmix_SCM_tests/cooling_only/EPBL/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/cooling_only/EPBL/MOM_parameter_doc.all index b1f64e41d..3e0e26407 100644 --- a/ocean_only/CVmix_SCM_tests/cooling_only/EPBL/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/cooling_only/EPBL/MOM_parameter_doc.all @@ -860,6 +860,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/CVmix_SCM_tests/cooling_only/KPP/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/cooling_only/KPP/MOM_parameter_doc.all index fced2c1be..136654c7c 100644 --- a/ocean_only/CVmix_SCM_tests/cooling_only/KPP/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/cooling_only/KPP/MOM_parameter_doc.all @@ -860,6 +860,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/CVmix_SCM_tests/mech_only/BML/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/mech_only/BML/MOM_parameter_doc.all index 3c1a8b730..21d015611 100644 --- a/ocean_only/CVmix_SCM_tests/mech_only/BML/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/mech_only/BML/MOM_parameter_doc.all @@ -722,6 +722,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/CVmix_SCM_tests/mech_only/EPBL/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/mech_only/EPBL/MOM_parameter_doc.all index 742dba18c..1453b19e8 100644 --- a/ocean_only/CVmix_SCM_tests/mech_only/EPBL/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/mech_only/EPBL/MOM_parameter_doc.all @@ -860,6 +860,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/CVmix_SCM_tests/mech_only/KPP/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/mech_only/KPP/MOM_parameter_doc.all index 98ebedda6..1bf28441b 100644 --- a/ocean_only/CVmix_SCM_tests/mech_only/KPP/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/mech_only/KPP/MOM_parameter_doc.all @@ -860,6 +860,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/CVmix_SCM_tests/skin_warming_wind/BML/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/skin_warming_wind/BML/MOM_parameter_doc.all index 69ab10abe..790933904 100644 --- a/ocean_only/CVmix_SCM_tests/skin_warming_wind/BML/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/skin_warming_wind/BML/MOM_parameter_doc.all @@ -722,6 +722,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/CVmix_SCM_tests/skin_warming_wind/EPBL/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/skin_warming_wind/EPBL/MOM_parameter_doc.all index 089062b12..621afc2bb 100644 --- a/ocean_only/CVmix_SCM_tests/skin_warming_wind/EPBL/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/skin_warming_wind/EPBL/MOM_parameter_doc.all @@ -860,6 +860,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/CVmix_SCM_tests/skin_warming_wind/KPP/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/skin_warming_wind/KPP/MOM_parameter_doc.all index baa6a9137..e5ee03b4a 100644 --- a/ocean_only/CVmix_SCM_tests/skin_warming_wind/KPP/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/skin_warming_wind/KPP/MOM_parameter_doc.all @@ -860,6 +860,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/CVmix_SCM_tests/wind_only/BML/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/wind_only/BML/MOM_parameter_doc.all index 9666cb320..dbc0b13a5 100644 --- a/ocean_only/CVmix_SCM_tests/wind_only/BML/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/wind_only/BML/MOM_parameter_doc.all @@ -722,6 +722,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/CVmix_SCM_tests/wind_only/EPBL/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/wind_only/EPBL/MOM_parameter_doc.all index 7c0315e86..3766d690a 100644 --- a/ocean_only/CVmix_SCM_tests/wind_only/EPBL/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/wind_only/EPBL/MOM_parameter_doc.all @@ -860,6 +860,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/CVmix_SCM_tests/wind_only/KPP/MOM_parameter_doc.all b/ocean_only/CVmix_SCM_tests/wind_only/KPP/MOM_parameter_doc.all index 399dc5224..c8c18d190 100644 --- a/ocean_only/CVmix_SCM_tests/wind_only/KPP/MOM_parameter_doc.all +++ b/ocean_only/CVmix_SCM_tests/wind_only/KPP/MOM_parameter_doc.all @@ -860,6 +860,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/DOME/MOM_parameter_doc.all b/ocean_only/DOME/MOM_parameter_doc.all index cc80df007..a38e43f1f 100644 --- a/ocean_only/DOME/MOM_parameter_doc.all +++ b/ocean_only/DOME/MOM_parameter_doc.all @@ -780,6 +780,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.002 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/Phillips_2layer/MOM_parameter_doc.all b/ocean_only/Phillips_2layer/MOM_parameter_doc.all index b2f0b6eff..94e571a40 100644 --- a/ocean_only/Phillips_2layer/MOM_parameter_doc.all +++ b/ocean_only/Phillips_2layer/MOM_parameter_doc.all @@ -686,6 +686,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.01 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/SCM_idealized_hurricane/MOM_parameter_doc.all b/ocean_only/SCM_idealized_hurricane/MOM_parameter_doc.all index c340f6b55..b78208fc7 100644 --- a/ocean_only/SCM_idealized_hurricane/MOM_parameter_doc.all +++ b/ocean_only/SCM_idealized_hurricane/MOM_parameter_doc.all @@ -860,6 +860,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/adjustment2d/layer/MOM_parameter_doc.all b/ocean_only/adjustment2d/layer/MOM_parameter_doc.all index 765e8d9da..177e06f5e 100644 --- a/ocean_only/adjustment2d/layer/MOM_parameter_doc.all +++ b/ocean_only/adjustment2d/layer/MOM_parameter_doc.all @@ -741,6 +741,9 @@ HBBL = 0.001 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/adjustment2d/rho/MOM_parameter_doc.all b/ocean_only/adjustment2d/rho/MOM_parameter_doc.all index 6b9d22b2d..49cb9d54d 100644 --- a/ocean_only/adjustment2d/rho/MOM_parameter_doc.all +++ b/ocean_only/adjustment2d/rho/MOM_parameter_doc.all @@ -924,6 +924,9 @@ HBBL = 0.001 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/adjustment2d/z/MOM_parameter_doc.all b/ocean_only/adjustment2d/z/MOM_parameter_doc.all index 2d74cd770..5404652de 100644 --- a/ocean_only/adjustment2d/z/MOM_parameter_doc.all +++ b/ocean_only/adjustment2d/z/MOM_parameter_doc.all @@ -876,6 +876,9 @@ HBBL = 0.001 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/benchmark/MOM_parameter_doc.all b/ocean_only/benchmark/MOM_parameter_doc.all index 14a2dab0a..0b0e543f7 100644 --- a/ocean_only/benchmark/MOM_parameter_doc.all +++ b/ocean_only/benchmark/MOM_parameter_doc.all @@ -820,6 +820,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.003 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/circle_obcs/MOM_parameter_doc.all b/ocean_only/circle_obcs/MOM_parameter_doc.all index 2b16edbf3..2cfbebc18 100644 --- a/ocean_only/circle_obcs/MOM_parameter_doc.all +++ b/ocean_only/circle_obcs/MOM_parameter_doc.all @@ -784,6 +784,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.002 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/double_gyre/MOM_parameter_doc.all b/ocean_only/double_gyre/MOM_parameter_doc.all index 7c3d62f6d..d9da7e421 100644 --- a/ocean_only/double_gyre/MOM_parameter_doc.all +++ b/ocean_only/double_gyre/MOM_parameter_doc.all @@ -611,6 +611,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.003 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/external_gwave/MOM_parameter_doc.all b/ocean_only/external_gwave/MOM_parameter_doc.all index 6a4b1472a..ee20416f4 100644 --- a/ocean_only/external_gwave/MOM_parameter_doc.all +++ b/ocean_only/external_gwave/MOM_parameter_doc.all @@ -730,6 +730,9 @@ HBBL = 0.001 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/flow_downslope/layer/MOM_parameter_doc.all b/ocean_only/flow_downslope/layer/MOM_parameter_doc.all index 63f6e1efb..68aac10b1 100644 --- a/ocean_only/flow_downslope/layer/MOM_parameter_doc.all +++ b/ocean_only/flow_downslope/layer/MOM_parameter_doc.all @@ -740,6 +740,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/flow_downslope/rho/MOM_parameter_doc.all b/ocean_only/flow_downslope/rho/MOM_parameter_doc.all index 94b3d87dc..13b36eb5c 100644 --- a/ocean_only/flow_downslope/rho/MOM_parameter_doc.all +++ b/ocean_only/flow_downslope/rho/MOM_parameter_doc.all @@ -925,6 +925,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/flow_downslope/sigma/MOM_parameter_doc.all b/ocean_only/flow_downslope/sigma/MOM_parameter_doc.all index 3ec28a50a..7eeddc0e4 100644 --- a/ocean_only/flow_downslope/sigma/MOM_parameter_doc.all +++ b/ocean_only/flow_downslope/sigma/MOM_parameter_doc.all @@ -877,6 +877,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/flow_downslope/z/MOM_parameter_doc.all b/ocean_only/flow_downslope/z/MOM_parameter_doc.all index e07f0cd5d..de1ec05c5 100644 --- a/ocean_only/flow_downslope/z/MOM_parameter_doc.all +++ b/ocean_only/flow_downslope/z/MOM_parameter_doc.all @@ -877,6 +877,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/global_ALE/hycom/MOM_parameter_doc.all b/ocean_only/global_ALE/hycom/MOM_parameter_doc.all index 780fc03b7..a211e8ffa 100644 --- a/ocean_only/global_ALE/hycom/MOM_parameter_doc.all +++ b/ocean_only/global_ALE/hycom/MOM_parameter_doc.all @@ -1125,6 +1125,9 @@ HBBL = 10.0 ! [m] ! KV_EXTRA_BBL if BOTTOMDRAGLAW is not defined, or the thickness over which ! near-bottom velocities are averaged for the drag law if BOTTOMDRAGLAW is ! defined but LINEAR_DRAG is not. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/global_ALE/layer/MOM_parameter_doc.all b/ocean_only/global_ALE/layer/MOM_parameter_doc.all index 8d63796e2..490962fe8 100644 --- a/ocean_only/global_ALE/layer/MOM_parameter_doc.all +++ b/ocean_only/global_ALE/layer/MOM_parameter_doc.all @@ -979,6 +979,9 @@ HBBL = 10.0 ! [m] ! KV_EXTRA_BBL if BOTTOMDRAGLAW is not defined, or the thickness over which ! near-bottom velocities are averaged for the drag law if BOTTOMDRAGLAW is ! defined but LINEAR_DRAG is not. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/global_ALE/z/MOM_parameter_doc.all b/ocean_only/global_ALE/z/MOM_parameter_doc.all index 9fbf54635..e2e18d3b2 100644 --- a/ocean_only/global_ALE/z/MOM_parameter_doc.all +++ b/ocean_only/global_ALE/z/MOM_parameter_doc.all @@ -1065,6 +1065,9 @@ HBBL = 10.0 ! [m] ! KV_EXTRA_BBL if BOTTOMDRAGLAW is not defined, or the thickness over which ! near-bottom velocities are averaged for the drag law if BOTTOMDRAGLAW is ! defined but LINEAR_DRAG is not. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/lock_exchange/MOM_parameter_doc.all b/ocean_only/lock_exchange/MOM_parameter_doc.all index 3fcb230f8..48247b9a5 100644 --- a/ocean_only/lock_exchange/MOM_parameter_doc.all +++ b/ocean_only/lock_exchange/MOM_parameter_doc.all @@ -733,6 +733,9 @@ HBBL = 0.001 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/mixed_layer_restrat_2d/MOM_parameter_doc.all b/ocean_only/mixed_layer_restrat_2d/MOM_parameter_doc.all index d8ef9bed3..d131272c5 100644 --- a/ocean_only/mixed_layer_restrat_2d/MOM_parameter_doc.all +++ b/ocean_only/mixed_layer_restrat_2d/MOM_parameter_doc.all @@ -862,6 +862,9 @@ HBBL = 0.001 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/nonBous_global/MOM_parameter_doc.all b/ocean_only/nonBous_global/MOM_parameter_doc.all index df66d98a4..c16f7e094 100644 --- a/ocean_only/nonBous_global/MOM_parameter_doc.all +++ b/ocean_only/nonBous_global/MOM_parameter_doc.all @@ -815,6 +815,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.003 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/resting/layer/MOM_parameter_doc.all b/ocean_only/resting/layer/MOM_parameter_doc.all index 3b1f73c6b..ec3d3301c 100644 --- a/ocean_only/resting/layer/MOM_parameter_doc.all +++ b/ocean_only/resting/layer/MOM_parameter_doc.all @@ -725,6 +725,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/resting/z/MOM_parameter_doc.all b/ocean_only/resting/z/MOM_parameter_doc.all index d89c0d6a0..e847a411c 100644 --- a/ocean_only/resting/z/MOM_parameter_doc.all +++ b/ocean_only/resting/z/MOM_parameter_doc.all @@ -862,6 +862,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/seamount/layer/MOM_parameter_doc.all b/ocean_only/seamount/layer/MOM_parameter_doc.all index 3213336cf..f7fc8f851 100644 --- a/ocean_only/seamount/layer/MOM_parameter_doc.all +++ b/ocean_only/seamount/layer/MOM_parameter_doc.all @@ -758,6 +758,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.002 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/seamount/rho/MOM_parameter_doc.all b/ocean_only/seamount/rho/MOM_parameter_doc.all index b8920783e..7acb9107e 100644 --- a/ocean_only/seamount/rho/MOM_parameter_doc.all +++ b/ocean_only/seamount/rho/MOM_parameter_doc.all @@ -941,6 +941,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.002 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/seamount/sigma/MOM_parameter_doc.all b/ocean_only/seamount/sigma/MOM_parameter_doc.all index 70ddc277d..12e63ce70 100644 --- a/ocean_only/seamount/sigma/MOM_parameter_doc.all +++ b/ocean_only/seamount/sigma/MOM_parameter_doc.all @@ -890,6 +890,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.002 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/seamount/z/MOM_parameter_doc.all b/ocean_only/seamount/z/MOM_parameter_doc.all index 521707b99..0ed2df9ae 100644 --- a/ocean_only/seamount/z/MOM_parameter_doc.all +++ b/ocean_only/seamount/z/MOM_parameter_doc.all @@ -890,6 +890,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.002 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/single_column/BML/MOM_parameter_doc.all b/ocean_only/single_column/BML/MOM_parameter_doc.all index 491260c29..bb45f991a 100644 --- a/ocean_only/single_column/BML/MOM_parameter_doc.all +++ b/ocean_only/single_column/BML/MOM_parameter_doc.all @@ -734,6 +734,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/single_column/EPBL/MOM_parameter_doc.all b/ocean_only/single_column/EPBL/MOM_parameter_doc.all index e769a9196..754f7c81b 100644 --- a/ocean_only/single_column/EPBL/MOM_parameter_doc.all +++ b/ocean_only/single_column/EPBL/MOM_parameter_doc.all @@ -827,6 +827,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/single_column/KPP/MOM_parameter_doc.all b/ocean_only/single_column/KPP/MOM_parameter_doc.all index e9c802931..2b5cc3bd5 100644 --- a/ocean_only/single_column/KPP/MOM_parameter_doc.all +++ b/ocean_only/single_column/KPP/MOM_parameter_doc.all @@ -827,6 +827,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/sloshing/layer/MOM_parameter_doc.all b/ocean_only/sloshing/layer/MOM_parameter_doc.all index e8596fb2c..a1951a3d3 100644 --- a/ocean_only/sloshing/layer/MOM_parameter_doc.all +++ b/ocean_only/sloshing/layer/MOM_parameter_doc.all @@ -739,6 +739,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/sloshing/rho/MOM_parameter_doc.all b/ocean_only/sloshing/rho/MOM_parameter_doc.all index 2df6f6280..a57c612fd 100644 --- a/ocean_only/sloshing/rho/MOM_parameter_doc.all +++ b/ocean_only/sloshing/rho/MOM_parameter_doc.all @@ -924,6 +924,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/sloshing/z/MOM_parameter_doc.all b/ocean_only/sloshing/z/MOM_parameter_doc.all index 879d7109b..f2068915c 100644 --- a/ocean_only/sloshing/z/MOM_parameter_doc.all +++ b/ocean_only/sloshing/z/MOM_parameter_doc.all @@ -876,6 +876,9 @@ HBBL = 10.0 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/tracer_mixing/rho/MOM_parameter_doc.all b/ocean_only/tracer_mixing/rho/MOM_parameter_doc.all index 3916083c7..3f01dea99 100644 --- a/ocean_only/tracer_mixing/rho/MOM_parameter_doc.all +++ b/ocean_only/tracer_mixing/rho/MOM_parameter_doc.all @@ -925,6 +925,9 @@ HBBL = 0.001 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/ocean_only/tracer_mixing/z/MOM_parameter_doc.all b/ocean_only/tracer_mixing/z/MOM_parameter_doc.all index 02f279473..adc8acd18 100644 --- a/ocean_only/tracer_mixing/z/MOM_parameter_doc.all +++ b/ocean_only/tracer_mixing/z/MOM_parameter_doc.all @@ -877,6 +877,9 @@ HBBL = 0.001 ! [m] CDRAG = 0.0 ! [nondim] default = 0.003 ! CDRAG is the drag coefficient relating the magnitude of the velocity field to ! the bottom stress. CDRAG is only used if BOTTOMDRAGLAW is defined. +CDRAG_MAP = False ! [Boolean] default = False + ! If true, apply a spatially varying scaling factor to CDRAG, specified by + ! CDRAG_VAR in CDRAG_FILE. BBL_USE_TIDAL_BG = False ! [Boolean] default = False ! Flag to use the tidal RMS amplitude in place of constant background velocity ! for computing u* in the BBL. This flag is only used when BOTTOMDRAGLAW is true diff --git a/src/MOM6 b/src/MOM6 index 196e49174..f2c89173d 160000 --- a/src/MOM6 +++ b/src/MOM6 @@ -1 +1 @@ -Subproject commit 196e491749f09bfa84b9bbfbb2ced339e8b18c2f +Subproject commit f2c89173d0b5446c30ddcc1e7cdb690f27fbd6e5