consider merging the functionalities of different classes handling ip adresses

[akhalfan]

Currently there are three classes handling IP addresses and subnets

edu.iu.incntre.flowscale.IPAddress
edu.iu.incntre.flowscale.IPAddressUtility
grnoc.net.util.ipaddress.IPv4Address

consider merging them ?

[xieanxiean]

hi ,i have encounted some problems while installing the flowscale.i cant download some packages from:http://of-lab2.grnoc.iu.edu/flowscaleupdate.so could you please send me some necessary packages through e-mail?such as:grnoc.util.net.ipaddress and so on .my e-mail addr is:xiean_hi@126.com.thanks a lot.

[bm4acd]

Yes, I have the same problem as xieanxiean.
In the Quick Start(http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site.

Is there any alternatives to solve this problem?

[xieanxiean]

In github instead of checkIng out the maIn branch checkout the branch dev/0.5

xiean_hi

From: bm4acd
Date: 2012-10-15 16:40
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30)
Yes, I have the same problem as xieanxiean.
In the Quick Start(http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site.
Is there any alternatives to solve this problem?
—
Reply to this email directly or view it on GitHub.

[bm4acd]

Dear xiean_hi,

Thanks, I have checked out the branch dev/0.5.
According to the Quick Start article, if open up the main.target file of
"Beacon Main Target" project and then click "Set as target platform.", the
projects of FlowScale will get errors. If open the main.target file of
"Flowscale Target Platform" and then set as target platform, there is no
error in the Eclipse IDE.

Following Running Flowscale part of Quick Start, no matter launch the
application in run mode or debug mode, it can't startup.(And there is no
error message).

Is there any setting I miss?

Thanks,
Yoyo Chen

2012/10/15 xieanxiean notifications@github.com

In github instead of checkIng out the maIn branch checkout the branch
dev/0.5

xiean_hi

From: bm4acd
Date: 2012-10-15 16:40
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of different
classes handling ip adresses (#30)
Yes, I have the same problem as xieanxiean.
In the Quick Start(
http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site.
Is there any alternatives to solve this problem?
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/30#issuecomment-9439526.

Best Regards,
Yoyo Chen

[xieanxiean]

probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a
link called"launch as Eclipse application in Debug mode".And it should start running.
But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.

xiean_hi

From: bm4acd
Date: 2012-10-16 16:00
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30)
Dear xiean_hi,

Thanks, I have checked out the branch dev/0.5.
According to the Quick Start article, if open up the main.target file of
"Beacon Main Target" project and then click "Set as target platform.", the
projects of FlowScale will get errors. If open the main.target file of
"Flowscale Target Platform" and then set as target platform, there is no
error in the Eclipse IDE.

Following Running Flowscale part of Quick Start, no matter launch the
application in run mode or debug mode, it can't startup.(And there is no
error message).

Is there any setting I miss?

Thanks,
Yoyo Chen

2012/10/15 xieanxiean notifications@github.com

In github instead of checkIng out the maIn branch checkout the branch
dev/0.5

xiean_hi

From: bm4acd
Date: 2012-10-15 16:40
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of different
classes handling ip adresses (#30)
Yes, I have the same problem as xieanxiean.
In the Quick Start(
http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site.
Is there any alternatives to solve this problem?
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/30#issuecomment-9439526.

Best Regards,
Yoyo Chen
—
Reply to this email directly or view it on GitHub.

[akhalfan]

Do you see any ports on your machine open
بتاريخ 2012 10 16 12:00، كتبها "bm4acd" notifications@github.com:

Dear xiean_hi,

Thanks, I have checked out the branch dev/0.5.
According to the Quick Start article, if open up the main.target file of
"Beacon Main Target" project and then click "Set as target platform.", the
projects of FlowScale will get errors. If open the main.target file of
"Flowscale Target Platform" and then set as target platform, there is no
error in the Eclipse IDE.

Following Running Flowscale part of Quick Start, no matter launch the
application in run mode or debug mode, it can't startup.(And there is no
error message).

Is there any setting I miss?

Thanks,
Yoyo Chen

2012/10/15 xieanxiean notifications@github.com

In github instead of checkIng out the maIn branch checkout the branch
dev/0.5

xiean_hi

From: bm4acd
Date: 2012-10-15 16:40
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Yes, I have the same problem as xieanxiean.
In the Quick Start(
http://www.openflowhub.org/display/FlowScale/Quick+Start), got error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site.
Is there any alternatives to solve this problem?
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.

Best Regards,
Yoyo Chen

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/30#issuecomment-9476018.

[bm4acd]

Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported
into eclipse too.
The Quick Start said that click "debug" button ("Click on the "debug"
button") in the flowscale-ids.product. I did it. No any message shown but
" flowscale-ids.product" shown in console view.

I found that in the Dependencies tab of flowscale-ids.product, the icon of
"org.eclipse.equinox.console.telnet" is with a red cross. I don't know is
this prevent me from launch flowscale. Will try to fix this problem.

2012/10/16 xieanxiean notifications@github.com

probably you should download edu.iu.incntre.flowscaleproduct and open the
flowscale-ids.product file,down in the testing label,there is a
link called"launch as Eclipse application in Debug mode".And it should
start running.
But I have encounted many errors.And I still can't resolve them.If you
have lanuch the app without exceptions,please help me and send the detail
steps you have followed.Thanks.

xiean_hi

From: bm4acd
Date: 2012-10-16 16:00
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of different
classes handling ip adresses (#30)
Dear xiean_hi,

Thanks, I have checked out the branch dev/0.5.
According to the Quick Start article, if open up the main.target file of
"Beacon Main Target" project and then click "Set as target platform.", the
projects of FlowScale will get errors. If open the main.target file of
"Flowscale Target Platform" and then set as target platform, there is no
error in the Eclipse IDE.

Following Running Flowscale part of Quick Start, no matter launch the
application in run mode or debug mode, it can't startup.(And there is no
error message).

Is there any setting I miss?

Thanks,
Yoyo Chen

2012/10/15 xieanxiean notifications@github.com

In github instead of checkIng out the maIn branch checkout the branch
dev/0.5

xiean_hi

From: bm4acd
Date: 2012-10-15 16:40
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Yes, I have the same problem as xieanxiean.
In the Quick Start(
http://www.openflowhub.org/display/FlowScale/Quick+Start), got error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site.
Is there any alternatives to solve this problem?
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.

Best Regards,
Yoyo Chen
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/30#issuecomment-9480589.

Best Regards,
Yoyo Chen

[bm4acd]

correction:
When I launch this product, eclipse popup a dialog "operation in progress"
and the disappear (less then 0.5 second).

2012/10/17 Yoyo Chen bm4acd@gmail.com

Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported
into eclipse too.
The Quick Start said that click "debug" button ("Click on the "debug"
button") in the flowscale-ids.product. I did it. No any message shown but
" flowscale-ids.product" shown in console view.

I found that in the Dependencies tab of flowscale-ids.product, the icon of
"org.eclipse.equinox.console.telnet" is with a red cross. I don't know is
this prevent me from launch flowscale. Will try to fix this problem.

2012/10/16 xieanxiean notifications@github.com

probably you should download edu.iu.incntre.flowscaleproduct and open the
flowscale-ids.product file,down in the testing label,there is a
link called"launch as Eclipse application in Debug mode".And it should
start running.
But I have encounted many errors.And I still can't resolve them.If you
have lanuch the app without exceptions,please help me and send the detail
steps you have followed.Thanks.

xiean_hi

From: bm4acd
Date: 2012-10-16 16:00
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different classes handling ip adresses (#30)
Dear xiean_hi,

Thanks, I have checked out the branch dev/0.5.
According to the Quick Start article, if open up the main.target file of
"Beacon Main Target" project and then click "Set as target platform.",
the
projects of FlowScale will get errors. If open the main.target file of
"Flowscale Target Platform" and then set as target platform, there is no
error in the Eclipse IDE.

Following Running Flowscale part of Quick Start, no matter launch the
application in run mode or debug mode, it can't startup.(And there is no
error message).

Is there any setting I miss?

Thanks,
Yoyo Chen

2012/10/15 xieanxiean notifications@github.com

In github instead of checkIng out the maIn branch checkout the branch
dev/0.5

xiean_hi

From: bm4acd
Date: 2012-10-15 16:40
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Yes, I have the same problem as xieanxiean.
In the Quick Start(
http://www.openflowhub.org/display/FlowScale/Quick+Start), got error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site.
Is there any alternatives to solve this problem?
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.

Best Regards,
Yoyo Chen
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/30#issuecomment-9480589.

Best Regards,
Yoyo Chen

Best Regards,
Yoyo Chen

[bm4acd]

Dear Ali,

I don't think so. It shows "terminated" in eclipse's console when launched.
I use netstat to check and there seems no any port about FlowScale (6633,
8080, or else).
(My environment is WinXP + JDK 1.6 + Eclipse Juno)

2012/10/16 Ali Khalfan notifications@github.com

Do you see any ports on your machine open
بتاريخ 2012 10 16 12:00، كتبها "bm4acd" notifications@github.com:

Dear xiean_hi,

Thanks, I have checked out the branch dev/0.5.
According to the Quick Start article, if open up the main.target file of
"Beacon Main Target" project and then click "Set as target platform.",
the
projects of FlowScale will get errors. If open the main.target file of
"Flowscale Target Platform" and then set as target platform, there is no
error in the Eclipse IDE.

Following Running Flowscale part of Quick Start, no matter launch the
application in run mode or debug mode, it can't startup.(And there is no
error message).

Is there any setting I miss?

Thanks,
Yoyo Chen

2012/10/15 xieanxiean notifications@github.com

In github instead of checkIng out the maIn branch checkout the branch
dev/0.5

xiean_hi

From: bm4acd
Date: 2012-10-15 16:40
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Yes, I have the same problem as xieanxiean.
In the Quick Start(
http://www.openflowhub.org/display/FlowScale/Quick+Start), got error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site.
Is there any alternatives to solve this problem?
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.

Best Regards,
Yoyo Chen

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9476018>.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/30#issuecomment-9481319.

Best Regards,
Yoyo Chen

[akhalfan]

In your eclipse directory do you see a logs directory?
بتاريخ 2012 10 17 09:28، كتبها "yoyochen" notifications@github.com:

Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported
into eclipse too.
The Quick Start said that click "debug" button ("Click on the "debug"
button") in the flowscale-ids.product. I did it. No any message shown but
" flowscale-ids.product" shown in console view.

I found that in the Dependencies tab of flowscale-ids.product, the icon of
"org.eclipse.equinox.console.telnet" is with a red cross. I don't know is
this prevent me from launch flowscale. Will try to fix this problem.

2012/10/16 xieanxiean notifications@github.com

probably you should download edu.iu.incntre.flowscaleproduct and open
the
flowscale-ids.product file,down in the testing label,there is a
link called"launch as Eclipse application in Debug mode".And it should
start running.
But I have encounted many errors.And I still can't resolve them.If you
have lanuch the app without exceptions,please help me and send the
detail
steps you have followed.Thanks.

xiean_hi

From: bm4acd
Date: 2012-10-16 16:00
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Dear xiean_hi,

Thanks, I have checked out the branch dev/0.5.
According to the Quick Start article, if open up the main.target file of
"Beacon Main Target" project and then click "Set as target platform.",
the
projects of FlowScale will get errors. If open the main.target file of
"Flowscale Target Platform" and then set as target platform, there is no
error in the Eclipse IDE.

Following Running Flowscale part of Quick Start, no matter launch the
application in run mode or debug mode, it can't startup.(And there is no
error message).

Is there any setting I miss?

Thanks,
Yoyo Chen

2012/10/15 xieanxiean notifications@github.com

In github instead of checkIng out the maIn branch checkout the branch
dev/0.5

xiean_hi

From: bm4acd
Date: 2012-10-15 16:40
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Yes, I have the same problem as xieanxiean.
In the Quick Start(
http://www.openflowhub.org/display/FlowScale/Quick+Start), got error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site.
Is there any alternatives to solve this problem?
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.

Best Regards,
Yoyo Chen
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.

Best Regards,
Yoyo Chen

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/30#issuecomment-9516450.

[bm4acd]

No, there is no new log files created in /logs.

2012/10/17 Ali Khalfan notifications@github.com

In your eclipse directory do you see a logs directory?
بتاريخ 2012 10 17 09:28، كتبها "yoyochen" notifications@github.com:

Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and
imported
into eclipse too.
The Quick Start said that click "debug" button ("Click on the "debug"
button") in the flowscale-ids.product. I did it. No any message shown
but
" flowscale-ids.product" shown in console view.

I found that in the Dependencies tab of flowscale-ids.product, the icon
of
"org.eclipse.equinox.console.telnet" is with a red cross. I don't know
is
this prevent me from launch flowscale. Will try to fix this problem.

2012/10/16 xieanxiean notifications@github.com

probably you should download edu.iu.incntre.flowscaleproduct and open
the
flowscale-ids.product file,down in the testing label,there is a
link called"launch as Eclipse application in Debug mode".And it should
start running.
But I have encounted many errors.And I still can't resolve them.If you
have lanuch the app without exceptions,please help me and send the
detail
steps you have followed.Thanks.

xiean_hi

From: bm4acd
Date: 2012-10-16 16:00
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Dear xiean_hi,

Thanks, I have checked out the branch dev/0.5.
According to the Quick Start article, if open up the main.target file
of
"Beacon Main Target" project and then click "Set as target platform.",
the
projects of FlowScale will get errors. If open the main.target file of
"Flowscale Target Platform" and then set as target platform, there is
no
error in the Eclipse IDE.

Following Running Flowscale part of Quick Start, no matter launch the
application in run mode or debug mode, it can't startup.(And there is
no
error message).

Is there any setting I miss?

Thanks,
Yoyo Chen

2012/10/15 xieanxiean notifications@github.com

In github instead of checkIng out the maIn branch checkout the
branch
dev/0.5

xiean_hi

From: bm4acd
Date: 2012-10-15 16:40
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Yes, I have the same problem as xieanxiean.
In the Quick Start(
http://www.openflowhub.org/display/FlowScale/Quick+Start), got
error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site.
Is there any alternatives to solve this problem?
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.

Best Regards,
Yoyo Chen
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.

Best Regards,
Yoyo Chen

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450>.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/30#issuecomment-9521078.

Best Regards,
Yoyo Chen

[akhalfan]

Did you modify the config files?
بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:

No, there is no new log files created in /logs.

2012/10/17 Ali Khalfan notifications@github.com

In your eclipse directory do you see a logs directory?
بتاريخ 2012 10 17 09:28، كتبها "yoyochen" notifications@github.com:

Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and
imported
into eclipse too.
The Quick Start said that click "debug" button ("Click on the "debug"
button") in the flowscale-ids.product. I did it. No any message shown
but
" flowscale-ids.product" shown in console view.

I found that in the Dependencies tab of flowscale-ids.product, the
icon
of
"org.eclipse.equinox.console.telnet" is with a red cross. I don't know
is
this prevent me from launch flowscale. Will try to fix this problem.

2012/10/16 xieanxiean notifications@github.com

probably you should download edu.iu.incntre.flowscaleproduct and
open
the
flowscale-ids.product file,down in the testing label,there is a
link called"launch as Eclipse application in Debug mode".And it
should
start running.
But I have encounted many errors.And I still can't resolve them.If
you
have lanuch the app without exceptions,please help me and send the
detail
steps you have followed.Thanks.

xiean_hi

From: bm4acd
Date: 2012-10-16 16:00
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Dear xiean_hi,

Thanks, I have checked out the branch dev/0.5.
According to the Quick Start article, if open up the main.target
file
of
"Beacon Main Target" project and then click "Set as target
platform.",
the
projects of FlowScale will get errors. If open the main.target file
of
"Flowscale Target Platform" and then set as target platform, there
is
no
error in the Eclipse IDE.

Following Running Flowscale part of Quick Start, no matter launch
the
application in run mode or debug mode, it can't startup.(And there
is
no
error message).

Is there any setting I miss?

Thanks,
Yoyo Chen

2012/10/15 xieanxiean notifications@github.com

In github instead of checkIng out the maIn branch checkout the
branch
dev/0.5

xiean_hi

From: bm4acd
Date: 2012-10-15 16:40
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Yes, I have the same problem as xieanxiean.
In the Quick Start(
http://www.openflowhub.org/display/FlowScale/Quick+Start), got
error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software
site.
Is there any alternatives to solve this problem?
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.

Best Regards,
Yoyo Chen
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.

Best Regards,
Yoyo Chen

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450>.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078>.

Best Regards,
Yoyo Chen

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/30#issuecomment-9521340.

[bm4acd]

just follow the Quick Start

Setup Beacon and OpenflowJ, and this part ok and works fine.
the projects structure of 0.5 is quite different from branch main.
I import all of the projects of branch 0.5 into workspace. It is ok to this
step.
And then fail to launch the Flowscale.

2012/10/17 Ali Khalfan notifications@github.com

Did you modify the config files?
بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:

No, there is no new log files created in /logs.

2012/10/17 Ali Khalfan notifications@github.com

In your eclipse directory do you see a logs directory?
بتاريخ 2012 10 17 09:28، كتبها "yoyochen" notifications@github.com:

Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and
imported
into eclipse too.
The Quick Start said that click "debug" button ("Click on the
"debug"
button") in the flowscale-ids.product. I did it. No any message
shown
but
" flowscale-ids.product" shown in console view.

I found that in the Dependencies tab of flowscale-ids.product, the
icon
of
"org.eclipse.equinox.console.telnet" is with a red cross. I don't
know
is
this prevent me from launch flowscale. Will try to fix this problem.

2012/10/16 xieanxiean notifications@github.com

probably you should download edu.iu.incntre.flowscaleproduct and
open
the
flowscale-ids.product file,down in the testing label,there is a
link called"launch as Eclipse application in Debug mode".And it
should
start running.
But I have encounted many errors.And I still can't resolve them.If
you
have lanuch the app without exceptions,please help me and send the
detail
steps you have followed.Thanks.

xiean_hi

From: bm4acd
Date: 2012-10-16 16:00
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Dear xiean_hi,

Thanks, I have checked out the branch dev/0.5.
According to the Quick Start article, if open up the main.target
file
of
"Beacon Main Target" project and then click "Set as target
platform.",
the
projects of FlowScale will get errors. If open the main.target
file
of
"Flowscale Target Platform" and then set as target platform, there
is
no
error in the Eclipse IDE.

Following Running Flowscale part of Quick Start, no matter launch
the
application in run mode or debug mode, it can't startup.(And there
is
no
error message).

Is there any setting I miss?

Thanks,
Yoyo Chen

2012/10/15 xieanxiean notifications@github.com

In github instead of checkIng out the maIn branch checkout the
branch
dev/0.5

xiean_hi

From: bm4acd
Date: 2012-10-15 16:40
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Yes, I have the same problem as xieanxiean.
In the Quick Start(
http://www.openflowhub.org/display/FlowScale/Quick+Start), got
error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software
site.
Is there any alternatives to solve this problem?
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<

https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.

Best Regards,
Yoyo Chen
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.

Best Regards,
Yoyo Chen

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450>.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078>.

Best Regards,
Yoyo Chen

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340>.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/30#issuecomment-9521975.

Best Regards,
Yoyo Chen

[akhalfan]

Yes, the structure is pretty much different, I cleaned up on a lot of
the hard coding as well as were the classes go.

one question before I dig deeper, when you say you get an error in
org.eclipse.equinox.console.telnet when you hover the mouse over it ,
does it give you a certain message (like there is a missing package ? )

Let me know

--Ali

yoyochen wrote:

just follow the Quick Start

Setup Beacon and OpenflowJ, and this part ok and works fine.
the projects structure of 0.5 is quite different from branch main.
I import all of the projects of branch 0.5 into workspace. It is ok to this
step.
And then fail to launch the Flowscale.

2012/10/17 Ali Khalfan notifications@github.com

Did you modify the config files?
بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:

No, there is no new log files created in /logs.

2012/10/17 Ali Khalfan notifications@github.com

In your eclipse directory do you see a logs directory?
بتاريخ 2012 10 17 09:28، كتبها "yoyochen" notifications@github.com:

Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and
imported
into eclipse too.
The Quick Start said that click "debug" button ("Click on the
"debug"
button") in the flowscale-ids.product. I did it. No any message
shown
but
" flowscale-ids.product" shown in console view.

I found that in the Dependencies tab of flowscale-ids.product, the
icon
of
"org.eclipse.equinox.console.telnet" is with a red cross. I don't
know
is
this prevent me from launch flowscale. Will try to fix this
problem.

2012/10/16 xieanxiean notifications@github.com

probably you should download edu.iu.incntre.flowscaleproduct and
open
the
flowscale-ids.product file,down in the testing label,there is a
link called"launch as Eclipse application in Debug mode".And it
should
start running.
But I have encounted many errors.And I still can't resolve
them.If
you
have lanuch the app without exceptions,please help me and send
the
detail
steps you have followed.Thanks.

xiean_hi

From: bm4acd
Date: 2012-10-16 16:00
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the functionalities of
different
classes handling ip adresses (#30)
Dear xiean_hi,

Thanks, I have checked out the branch dev/0.5.
According to the Quick Start article, if open up the main.target
file
of
"Beacon Main Target" project and then click "Set as target
platform.",
the
projects of FlowScale will get errors. If open the main.target
file
of
"Flowscale Target Platform" and then set as target platform,
there
is
no
error in the Eclipse IDE.

Following Running Flowscale part of Quick Start, no matter launch
the
application in run mode or debug mode, it can't startup.(And
there
is
no
error message).

Is there any setting I miss?

Thanks,
Yoyo Chen

2012/10/15 xieanxiean notifications@github.com

In github instead of checkIng out the maIn branch checkout the
branch
dev/0.5

xiean_hi

From: bm4acd
Date: 2012-10-15 16:40
To: InCNTRE/FlowScale
CC: xieanxiean
Subject: Re: [FlowScale] consider merging the
functionalities of
different
classes handling ip adresses (#30)
Yes, I have the same problem as xieanxiean.
In the Quick Start(
http://www.openflowhub.org/display/FlowScale/Quick+Start), got
error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software
site.
Is there any alternatives to solve this problem?
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<

https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.

Best Regards,
Yoyo Chen
—
Reply to this email directly or view it on GitHub.

—
Reply to this email directly or view it on GitHub<

https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.

Best Regards,
Yoyo Chen

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450>.

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078>.

Best Regards,
Yoyo Chen

—
Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340>.

—
Reply to this email directly or view it on
GitHubhttps://github.com//issues/30#issuecomment-9521975.

Best Regards,
Yoyo Chen

—
Reply to this email directly or view it on GitHub
#30 (comment).