diff --git a/.DS_Store b/.DS_Store
new file mode 100644
index 0000000..1c667f5
Binary files /dev/null and b/.DS_Store differ
diff --git a/Readme.md b/Readme.md
new file mode 100644
index 0000000..9ce7041
--- /dev/null
+++ b/Readme.md
@@ -0,0 +1,34 @@
+# US Air Pollution Analysis
+
+
+## Goal
+
+Taking a deep dive into the US Air Pollution Statistics for CO, SO2, NO2 and Ozone and understanding if pollutants have come down.
+
+
+## Introduction
+This project looks into very harmful pollutants like CO, SO2, NO2 and Ozone in the lower layers of the atmosphere. Generally, we know that the common pollutants like CO2 are increasing in the atmosphere. Due to different environmental movements that have brought attention to the pollutants mentioned above, I want to see if there has been any decrease in the pollutants that may show that we as a society are moving slowly but surely towards protecting the atmosphere.
+
+### Dataset
+The data set was downloaded from [Kaggle](https://www.kaggle.com/sogun3/uspollution). For the application to use the dataset, the downloaded file was cleaned is stored on Google Drive.
+
+### Features
+* A look at the Raw Data
+* View metrics and AQI graphs for a selected state (from a drop down) over the years. The graphs can be scaled
+* View graphs for a particular state of interest over time for selected pollutants. Here we can delve deeper into the values that contribute to the calculation of an AQI like the mean and max values of the pollutants
+* View graphs for all the pollutants everyday for a year and state of your choice.
+* Observe the AQI values of all the states on a Map with the colors as decided by the EPA
+
+
+## Design Decisions
+1. Use of line charts: To visualize the trends over time, the a subset of the data was resampled based on year and month to show different trends over time
+2. Use of Choropleth Maps: The dataset contained information on a state level. I used this to visualize the Air Quality Index as calculated by the EPA and plot the colors of the air quality using the ranges and guidelines provided by the EPA
+3. Use of scatterplots: To visualize the data on a daily level, the data was filtered based on state and was plotted on a scatter plot. There are multiple scatterplots, one for each parameter.
+
+
+## Development 
+It took about 40 hours for me to develop the application. I initially experimented with different datasets to figure out what I want to showcase. This was 20% of time. After deciding the dataset, I spent 60% of my time on EDA, to clean the data and sample the data for different conditions. I spent 20% of time to develop my application and tell a story. 
+
+## Future Work
+1. Concentrate on a particular region a perfrom a deep analysis on the pollution statistics. 
+2. Suggest a method or a plan to reduce pollution
\ No newline at end of file
diff --git a/project.py b/project.py
new file mode 100644
index 0000000..686fcb2
--- /dev/null
+++ b/project.py
@@ -0,0 +1,247 @@
+import streamlit as st
+import pandas as pd
+import numpy as np
+# import matplotlib.pyplot as plt
+# import seaborn as sns
+import pydeck as pdk
+import plotly.express as px
+
+# from geopy.geocoders import Nominatim
+
+st.set_page_config(layout="wide")
+
+# filename = '/Users/ksheerajaraghavan/CMU/2nd Sem/Interactive Data Science/HW2/HW2_Data_Science/cleaned.csv'
+
+url='https://drive.google.com/file/d/1d71oTtuquCXbSqeSLzhnUhBSbOzpBllP/view?usp=sharing'
+path = 'https://drive.google.com/uc?export=download&id='+url.split('/')[-2]
+df = pd.read_csv(path)
+
+# convert states
+states = {'Alabama': 'AL', 'Alaska': 'AK', 'Arizona': 'AZ', 'Arkansas': 'AR', 'California': 'CA',
+          'Colorado': 'CO', 'Connecticut': 'CT', 'Delaware': 'DE', 'Florida': 'FL', 'Georgia': 'GA',
+          'Hawaii': 'HI', 'Idaho': 'ID', 'Illinois': 'IL', 'Indiana': 'IN', 'Iowa': 'IA', 'Kansas': 'KS',
+          'Kentucky': 'KY', 'Louisiana': 'LA', 'Maine': 'ME', 'Maryland': 'MD', 'Massachusetts': 'MA',
+          'Michigan': 'MI', 'Minnesota': 'MN', 'Mississippi': 'MS', 'Missouri': 'MO', 'Montana': 'MT',
+          'Nebraska': 'NE', 'Nevada': 'NV', 'New Hampshire': 'NH', 'New Jersey': 'NJ', 'New Mexico': 'NM',
+          'New York': 'NY', 'North Carolina': 'NC', 'North Dakota': 'ND', 'Ohio': 'OH', 'Oklahoma': 'OK',
+          'Oregon': 'OR', 'Pennsylvania': 'PA', 'Rhode Island': 'RI', 'South Carolina': 'SC',
+          'South Dakota': 'SD', 'Tennessee': 'TN', 'Texas': 'TX', 'Utah': 'UT', 'Vermont': 'VT',
+          'Virginia': 'VA', 'Washington': 'WA', 'West Virginia': 'WV', 'Wisconsin': 'WI', 'Wyoming': 'WY'}
+
+
+# geolocator = Nominatim(user_agent='application')
+
+@st.cache
+def load_data(f):
+    df = pd.read_csv(f)
+    return df
+
+def year_line(data):
+    df = data[data['State'] != 'Country Of Mexico']  # deleting Mexico
+    df = df[df['State'] != 'District Of Columbia']  # deleting Columbia
+    state_list = data.State.unique()
+    stat = st.selectbox(label='Select a state', options=state_list)
+    df = df[df['State'] == stat]
+    # df['sr'] = df.State.apply(lambda x: states[x])
+    # st.write(df.head())
+    b = df.drop(['NO2 Mean', 'SO2 Mean', 'O3 Mean', 'CO Mean', 'NO2 1st Max Value', 'SO2 1st Max Value', 'O3 1st Max Value', 'CO 1st Max Value','NO2 1st Max Hour', 'SO2 1st Max Hour', 'O3 1st Max Hour', 'CO 1st Max Hour'], axis=1)
+    # st.write(b.head())
+    #b = b.set_index('Date Local')
+    b['Date Local'] = pd.to_datetime(b['Date Local'])
+    # b = b.set_index('Date Local')
+    # st.write(b.head())
+    a = b.resample('Y',on='Date Local').mean()
+    a.reset_index(inplace=True)
+    # st.write('A is ')
+    # st.write(a)
+    a['Year'] = a['Date Local'].dt.year
+    # Sorting values by Date Local (for animated choropleth presented below)
+    a.sort_values(by = 'Date Local', inplace = True)
+    # st.write(a)
+    a = a.drop(['Date Local'], axis=1)
+    a = a.set_index('Year')
+    # st.write(a)
+    m = a.max()
+    # m[0] = m[0].astype(int)
+    # st.write(m)
+    st.text('The max metrics are :')
+    col1, col2 = st.columns(2)
+    col1.metric('NO2 AQI', m['NO2 AQI'])
+    col2.metric('O3 AQI', m['O3 AQI'])
+    col3, col4 = st.columns(2)
+    col3.metric('SO2 AQI', m['SO2 AQI'])
+    col4.metric('CO AQI', m['CO AQI'])
+    st.text('Over Time...........')
+    st.line_chart(a)
+    st.text('From what I see, the trends fluctuate with different states')
+
+
+
+def maps_AQI(data):
+    st.text('Change the pollutants and Play the video')
+    df = data[data['State'] != 'Country Of Mexico']  # deleting Mexico
+    df = df[df['State'] != 'District Of Columbia']  # deleting Columbia
+    df['sr'] = df.State.apply(lambda x: states[x])
+    # st.write(df.head())
+    b = df.drop(['NO2 Mean', 'SO2 Mean', 'O3 Mean', 'CO Mean', 'NO2 1st Max Value', 'SO2 1st Max Value', 'O3 1st Max Value', 'CO 1st Max Value','NO2 1st Max Hour', 'SO2 1st Max Hour', 'O3 1st Max Hour', 'CO 1st Max Hour'], axis=1)
+    # st.write(b.head())
+    #b = b.set_index('Date Local')
+    b['Date Local'] = pd.to_datetime(b['Date Local'])
+    pollutant_list = ['NO2 AQI', 'SO2 AQI', 'O3 AQI', 'CO AQI']
+    pollutant1 = st.selectbox('What pollutant do you want to see', pollutant_list)
+    # b = b.set_index('Date Local')
+    a = b.groupby('sr').resample('Y',on='Date Local').mean()
+    a.reset_index(inplace=True)
+    # st.write('A is ')
+    # st.write(a)
+    a['Year'] = a['Date Local'].dt.year
+    # Sorting values by Date Local (for animated choropleth presented below)
+    a.sort_values(by = 'Date Local', inplace = True)
+    # st.write(a)
+    # Plotly choropleth showing AQI for Nitrogen Dioxide changes from 2000 to 2016
+    fig_NO2 = px.choropleth(a,
+                  locations = 'sr',
+                  animation_frame="Year", # showing changes through the years
+                  color=pollutant1,
+                  # Creating fixed scale (the same as defined by EPA)
+                  color_continuous_scale = [(0.00, "green"),   (0.1, "green"),
+                                            (0.1, "yellow"), (0.2, "yellow"),
+                                            (0.2, "orange"),  (0.3, "orange"),
+                                            (0.3, "red"),  (0.6, "red"),
+                                            (0.6, "maroon"),  (1.00, "maroon"),
+                                            ],
+                  range_color = (0, 500),
+                  locationmode='USA-states',
+                  scope="usa",
+                  title='Mean values of Air Quality Index (AQI) per year for ' + pollutant1,
+                  height=600,
+                 )
+
+    # Modifying legend 
+    fig_NO2.update_layout(coloraxis_colorbar=dict(
+        title="Air Quality Index (AQI)",
+        ticks="outside", 
+        dtick=50
+    ))
+    st.plotly_chart(fig_NO2)
+    # resample('Y').mean(4)
+
+
+def onestate(data):
+    st.subheader('Let us look at everything for one state')
+    # st.subheader('Choose all the pollutants for one state')
+    state_list = data.State.unique()
+    values = st.selectbox(label='Choose one state', options=state_list)
+    pollutant_list = ['NO2 Mean', 'SO2 Mean', 'O3 Mean', 'CO Mean',  'NO2 1st Max Value', 'SO2 1st Max Value', 'O3 1st Max Value', 'CO 1st Max Value','NO2 1st Max Hour', 'SO2 1st Max Hour', 'O3 1st Max Hour', 'CO 1st Max Hour']
+    pollutant1 = st.multiselect('What pollutant(s) do you want to see ? (You can choose multiple)', pollutant_list,['NO2 Mean'])
+    # st.write(data.head(10000))
+    st.text('Resampling the data based on year and month can change the graph... ')
+    st.text('May be we can find patterns')
+    time_list = ['Year', 'Month']
+    time1 = st.selectbox('Choose Resampling time: ', time_list)
+    b = data[data['State'] == values]
+    pollutant1 = pollutant1 + ['Date Local', 'State']
+    b = b.filter(pollutant1)
+    b = b.set_index('Date Local')
+    b.index = pd.to_datetime(b.index)
+    b = b.resample(time1[0]).mean()
+    st.line_chart(b)
+
+
+def statewise(data):
+    st.subheader('One Pollutant for One state')
+    state_list = data.State.unique()
+    state = st.selectbox('Choose state: ', state_list)
+    st.write('You have selected: ' + state)
+    pollutant_list = ['NO2 Mean', 'SO2 Mean', 'O3 Mean', 'CO Mean', 'NO2 AQI', 'SO2 AQI', 'O3 AQI', 'CO AQI']
+    pollutant = st.selectbox('Choose pollutant: ', pollutant_list)
+    st.write('You have selected: ' + pollutant)
+    time_list = ['Month', 'Year']
+    time2 = st.selectbox('Choose time: ', time_list)
+    st.write('You have selected: ' + time2)
+    column = data.columns
+    # filter for histogram
+    hist_data = data[data['State'] == state]
+    a = hist_data.copy()
+    a = a.set_index('Date Local')
+
+    a.index = pd.to_datetime(a.index)
+    b = a.resample(time2[0]).mean()
+    b = b.filter([pollutant])
+    st.subheader('Graph of ' + state + ' with pollutant ' + pollutant + ' for ' + time2 + 'ly view')
+    st.line_chart(b)
+
+
+def year(data):
+    import time
+    state_list = data.State.unique()
+    st.text('Let us be more specific. Think of your home state...')
+    values = st.selectbox(label='Select State', options=state_list)
+    year_list = np.arange(2000, 2017)
+    # st.write(year_list)
+    year = st.selectbox('What year do you want to see?', year_list)
+    # st.write(data.head(10000))
+
+    b = data[data['State'] == values]
+    # st.write(b)
+    b['Date Local'] = pd.to_datetime(b['Date Local'])
+    mask = b['Date Local'].dt.year == int(year)
+    b = b[mask]
+    b = b.drop(['NO2 1st Max Value', 'NO2 1st Max Hour', 'O3 1st Max Value', 'O3 1st Max Hour','SO2 1st Max Value', 'SO2 1st Max Hour', 'CO 1st Max Value', 'CO 1st Max Hour' ],axis=1)
+    # st.write(b)
+    # st.write(len(b.columns))
+    po = ['NO2', 'O3', 'SO2', 'CO']
+    j = 0
+    for i in range(4, len(b.columns)-1 ,2):
+        st.subheader(po[j])
+        col1, col2 = st.columns(2)
+        with col1:
+            fig = px.scatter(b, x='Date Local', y=b.columns[i])
+            st.plotly_chart(fig)
+        with col2:
+            fig = px.scatter(b, x='Date Local', y=b.columns[i+1])
+            st.plotly_chart(fig)
+        j += 1
+
+    
+    st.subheader('As we change the year... We can notice the magnitudes of the pollutants change... ')
+    st.text('NO2 tends to decrease in most states')
+    st.text('CO also tends to decrese')
+    st.text('SO2 also tends to increse')
+
+
+    # st.line_chart(b)
+
+
+if __name__ == '__main__':
+    data = load_data(path)
+    st.title('Have we destroyed our planet Earth?')
+    st.header('Let us look at US Air Quality.....')
+    st.text('Let us look at the raw data...')
+    st.write(data.head(100))
+    st.text('Hmm... I think I need to be an Environmental Engineer to understand this...')
+
+    st.subheader('Lets make it simpler.')
+    st.text('We can look at trends over the years')
+    year_line(data)
+    # st.subheader('Select Check Box for State Wise Plots')
+    # if st.checkbox('State Plots'):
+    #     statewise(data)
+
+  
+    st.subheader('For a single state let us visualise the trends of the pollutants')
+    onestate(data)
+    # statewise(data)
+    # st.title('Year')
+    st.subheader('Can we be more specific? Let us look at one year for one state')
+    year(data)
+    st.header('Let us summarise ... ')
+    st.subheader('US map overall')
+    maps_AQI(data)
+    st.subheader('Observations')
+    st.text('Depending on the sate we notice that certain pollutants decrease like NO2 and CO')
+    st.text('The states with large urban population, has higher amounts of pollutants in the atmosphere')
+    st.text('Depending on the sate we notice that certain pollutants decrease like ozone increase')
+    st.text('NO2 mean has a similar U-shaped graph every year for most states, showing annual trends.')
+    st.text(' This is visualised by looking at the different scatter plots for different states.')
+
diff --git a/requirements.txt b/requirements.txt
new file mode 100644
index 0000000..5400c17
--- /dev/null
+++ b/requirements.txt
@@ -0,0 +1,5 @@
+matplotlib==3.3.2
+pandas==1.1.3
+numpy==1.19.2
+pydeck==0.7.0
+plotly==4.14.3
\ No newline at end of file