CTRE Phoenix Framework Installer 5.15.0

Release of Phoenix Framework to support multi-platform Phoenix Tuner and VS 2019 for HERO.

For changes, see section 5.15.0 of the release notes here.

Phoenix-diagnostics-Tuner-v1.5.1 (pre-release)

Pre-release to add preliminary Diagnostics/Tuner support for the Raspberry Pi platform.
As this is a pre-release, there may be limitations and/or bugs in new features. Please report these as an issue tracker.

Changes:
Adds preliminary support for the Raspberry Pi platform when using SocketCAN. Install/Uninstall/Stop/Start buttons are functional, along with all CAN device features. Raspberry Pi vs Jetson vs roboRIO platform is auto-detected for Installation.
Known limitations:
"Force Stop" -> "Force Start" may be required on Raspberry Pi boot or if the SocketCAN device is reconnected.

Phoenix-diagnostics-Tuner-v1.5.0 (pre-release)

Pre-release to add preliminary Diagnostics/Tuner support for the NVidia Jetson Nano/TX2 platforms.
As this is a pre-release, there may be limitations and/or bugs in new features. Please report these as an issue tracker.

This release requires the Jetson to have an image with Ubuntu 18.04 or later.

Changes:

• Adds preliminary support for the Jetson platform when using SocketCAN. Install/Uninstall/Stop/Start buttons are functional, along with all CAN device features. Jetson vs roboRIO platform is auto-detected for Installation.

Known limitations:

• "Force Stop" -> "Force Start" may be required on Jetson boot or if the SocketCAN device is reconnected.

Phoenix-diagnostics-Tuner-v1.4.0

Changes:

• Fixes Display Issue with High DPI Monitors

CTRE Phoenix Framework Installer 5.14.1.2

2019 FRC Optimization Update

For changes, see section 5.14.1 of the release notes here.

Firmware-for-Phoenix-v5.14.1

Updated Talon SRX, and Victor SPX firmware files(crf) included in Phoenix 5.14.1

This improves a limitation where Motion Magic velocity curve is coarse due to using a low-resolution sensor.
This was accomplished by increasing the arithmetic precision of the algorithm to better support smaller ranges in sensor values, typically seen with 10-turn analog pots or low-PPR encoders.

If you are using an older firmware release and you are not experiencing this limitation, then there is no need to update.

Thanks FRC Team 3244 - Granite City Gearheads, for providing the test conditions and confirming the fix.

Pigeon IMU firmware is also included but has not changed since 5.14.0.
CANifier firmware is also included but has not changed since Kickoff.

For changes, see section 5.14.1 of the release notes here.

Firmware-Talon-4.20 (pre-release)

EDIT: This file has been removed as it is deprecated by the official release of firmware version 4.22.
https://github.com/CrossTheRoadElec/Phoenix-Releases/releases/tag/Firmware-for-Phoenix-v5.14.1

This is a pre-release of Talon 4.20 firmware.

We strongly recommend instead using Phoenix 5.14.1 which has the official firmware that contains the final fix referenced in this pre-release.

This improves a limitation where **Motion Magic velocity curve** is **coarse** due to using a **low-resolution sensor**.
This was accomplished by increasing the arithmetic precision of the algorithm to better support smaller ranges in sensor values, typically seen with **ten-turn analog pots or low-PPR encoders**.

If you are using an older firmware release and you are not experiencing this limitation, then there is no need to update.  

Future formal Phoenix releases will pick up this or newer firmware, as part of the normal release cycle.

Thanks **FRC Team 3244 - Granite City Gearheads**, for providing the test conditions and confirming the fix.

CTRE Phoenix Framework Installer 5.14.0.0

2019 FRC Week 6 Feature Release

For changes, see section 5.14.0 of the release notes here.

Phoenix-diagnostics-Tuner-v1.3.0

Changes:

• Diag Server updated to 1.3
• Added motion magic / motion profile to plotter
• Added config support for s-curve
• Various performance improvements
• Improved error message at bottom of screen during lost comm
• Version is grayed when comm is lost.
• Self-Test: Copy to clipboard for self-test
• Diag Server: Buffering fix in frame handler

Firmware-for-Phoenix-v5.14.0

Updated Talon SRX, and Victor SPX firmware files(crf) included in Phoenix 5.14.0

Pigeon IMU firmware is also included but has not changed since 5.13.0.
CANifier firmware is also included but has not changed since Kickoff.

For changes, see section 5.14.0 of the release notes here.