Sherpa + cw2-tap don't seem to line up well

[VoltexRB]

Let me preface this by saying I am not sure I even have the correct files for my setup, but these seem to make the most sense and are also the ones that fit the best together. It would definitely help if there were assembly files or at least information which extruders which cowlings are compatible with, but those are also some niche QoL changes, so thats not the issue at hand

So my combo is going to be a Sherpa Mini, a Chaoticlab Tap, LDO Nitehawk 36 for which I am still designing a mount as the normal upwards facing wire mount doesnt fit in a Trident, and a Phaetus Rapido v2 HF. When I Import the Cowling and Fanduct with Rapido and "cw2-tap" in their name in my old XOL assembly, where it also has TAP and align the cowling with the top Tap mounting holes, then the Cowling doesnt align with the Sherpa but is spaced about 1,2mm (1,194mm) away from it. This then in turn leads to the stepper motor touching the back side of the cowling that attaches to the TAP and the TAP itself. I made myself a little 2.5D adapter plate I can put between that raises the Sherpa Mini by 1.2mm, but I think it would be better if there were some changes made to the base cowling.

Those are just suggestions though. I dont know what solution would work the best. I just noticed that it doesnt seem to line up correctly