Merge pull request #1191 from ApolloAutomation/dev

Sync dev to main: Music Assistant 2.10.7 requirement for CAST players

Author: Bunton33

docs/products/cast1/faq.md

@@ -73,4 +73,8 @@ description: Frequently asked questions about the CAST-1 audio caster.
 
 * Set **Firmware Channel** to **Beta** on your CAST-1's device page, then select **Press** next to **Firmware Update**. See [Switch to Beta Firmware](../general/setup/switch-to-beta-branch.md) for a step-by-step guide.
 
+17\. **My CAST-1 doesn't show up in Music Assistant after a firmware update. What do I do?**
+
+* Update Music Assistant to 2.10.7 or newer. Newer CAST-1 firmware uses an updated Sendspin connection that older Music Assistant versions can't connect to.
+
 [Join our Discord if you need more help! :simple-discord:](https://link.apolloautomation.com/discord){ .md-button }

docs/products/cast1/setup/getting-started.md

@@ -86,6 +86,10 @@ Open the ESPHome Integration, then click **Add** and **Submit**. Edit the name a
 
 The CAST-1 streams through <a href="https://www.music-assistant.io/" target="_blank" rel="noreferrer nofollow noopener">Music Assistant</a>. Once Music Assistant is running, your CAST-1 shows up as a player automatically, no extra configuration needed.
 
+!!! note "Use Music Assistant 2.10.7 or newer"
+
+    Newer CAST-1 firmware needs Music Assistant 2.10.7 or newer to connect. If Music Assistant is already installed, update it from its app page first.
+
 ### Install Music Assistant
 
 You'll install the Music Assistant app, then add its integration in Home Assistant.

docs/products/castpro1/introduction.md

@@ -4,7 +4,7 @@ description: Documentation for CAST PRO-1, including setup, usage, and best prac
 ---
 # Introduction
 
-**Make Any Speakers Smart:** Connect the CAST PRO-1 to your speakers, receiver or soundbar, add it to Home Assistant, and it shows up in Music Assistant as a player you can stream to.
+**Make Any Speakers Smart:** Connect the CAST PRO-1 to your speakers, receiver or soundbar, add it to Home Assistant, and it shows up in Music Assistant as a player you can stream to. It needs Music Assistant 2.10.7 or newer.
 
 **Analog or Optical Output:** Use the analog output for powered speakers, or the optical output for a receiver or soundbar. Pick which one plays with the **Audio Output** setting on the device page.